Category Archives: Projects
SUNDAR update #2
I took a few weeks off for vacation and to get my son ready to go to Europe for two years to complete his master’s program. I have a few things left to clean up before I can start back into … Continue reading
SUNDAR update
Today I replaced the opamps with the new ones I just got from Analog Devices. These were SMT parts and I had to solder them to DIP adapters. But they share the same pin outs as a DIP, so the … Continue reading
All is not lost with GPS
So after looking at the GPS data I collected, I figured I would try another data collection in 2D mode with the know altitude set. That would allow me to use one more satellite for horizontal position. I collected 12 … Continue reading
GPS error
Towards my goal of entering the AVC competition in 2014, I have been evaluating GPS units. The current model I am looking at is a u-Blox LEA-6H with a patch antenna. The first test I tried was to hold the … Continue reading
A Storm!
Had a storm come through the area when I was at work. Luckily I had the Tautic board running and collecting data. I have just spent some time processing the data and I am now rather hopeful that this might … Continue reading
AS3935 “Striker” software update
I was notified my Striker code on GitHub had a defect (bug). The contributor posted a patch that I have implemented. You can find the updated code at www.github.com/skyesweeney/striker
Opamp trouble
Been working on the two stage opamp for my Sundar. The first stage takes the current from the photodiode and turns it into a voltage with a certain amount of gain. The second stage applies a second gain as well … Continue reading
SUNDAR update
Been working on my SUNDAR in what little free time I have these days. Last night my Digikey order came in and I was able to get the dual channel digital potentiometer working. This will be used for a software … Continue reading
SUNDAR project
In the interest of trying to determine my heading for the AVC robot competition, I have been working on a celestial solution. I am calling this device a SUNDAR as a hybrid of SUN and RADAR. In essence I am … Continue reading
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Additionally, a 503 Service Unavailable error was encountered while trying to use an ErrorDocument to handle the request.